Goto Section: 15.35 | 15.38 | Table of Contents

FCC 15.37
Revised as of October 1, 2014
Goto Year:2013 | 2015
§ 15.37   Transition provisions for compliance with the rules.

   (a) The manufacture or importation of scanning receivers, and frequency
   converters designed or marketed for use with scanning receivers, that
   do not comply with the provisions of § 15.121 shall cease on or before
   October 25, 1999. Effective July 26, 1999, the Commission will not
   grant equipment authorization for receivers that do not comply with the
   provisions of § 15.121. This paragraph does not prohibit the sale or
   use of authorized receivers manufactured in the United States, or
   imported into the United States, prior to October 25, 1999.

   (b) Effective October 16, 2002, an equipment approval may no longer be
   obtained for medical telemetry equipment operating under the provisions
   of § 15.241 or § 15.242. The requirements for obtaining an approval for
   medical telemetry equipment after this date are found in subpart H of
   part 95 of this chapter.

   (c) All radio frequency devices that are authorized under the
   certification, verification or declaration of conformity procedures on
   or after July 12, 2004 shall comply with the conducted limits specified
   in § 15.107 or § 15.207 as appropriate. All radio frequency devices
   that are manufactured or imported on or after July 11, 2005 shall
   comply with the conducted limits specified in § 15.107 or § 15.207, as
   appropriate. Equipment authorized, imported or manufactured prior to
   these dates shall comply with the conducted limits specified in
   § 15.107 or § 15.207, as appropriate, or with the conducted limits that
   were in effect immediately prior to September 9, 2002.

   (d) Radar detectors manufactured or imported after August 28, 2002 and
   marketed after September 27, 2002 shall comply with the regulations
   specified in this part. Radar detectors manufactured or imported prior
   to January 27, 2003 may be labeled with the information required by
   § 2.925 of this chapter and § 15.19(a) on the individual equipment
   carton rather than on the device, and are exempt from complying with
   the requirements of § 15.21.

   (e) U-NII equipment operating in the 5.25-5.35 GHz band for which
   applications for certification are filed on or after July 20, 2006
   shall comply with the DFS and TPC requirements specified in § 15.407.
   U-NII equipment operating in the 5.25-5.35 GHz band that are imported
   or marketed on or after July 20, 2007 shall comply with the DFS and TPC
   requirements in § 15.407.

   (f) All Access BPL devices that are manufactured, imported, marketed or
   installed on or after July 7, 2006, shall comply with the requirements
   specified in subpart G of this part, including certification of the
   equipment.

   (g) The manufacture or importation of auditory assistance devices that
   operate in the 72.0-73.0 MHz, 74.6-74.8 MHz, and 75.2-76.0 MHz bands
   that do not comply with the requirements of § 15.237(c) shall cease on
   or before July 11, 2016. Effective January 12, 2015, equipment approval
   will not be granted for auditory assistance devices that operate in the
   72.0-73.0 MHz, 74.6-74.8 MHz, and 75.2-76.0 MHz bands that do not
   comply with the requirements of § 15.237(c). These rules do not
   prohibit the sale or use of authorized auditory assistance devices that
   operate in the 72.0-73.0 MHz, 74.6-74.8 MHz, and 75.2-76.0 MHz bands
   manufactured in the United States, or imported into the United States,
   prior to July 11, 2016.

   (h) Effective June 2, 2015 devices using digital modulation techniques
   in the 5725-5850 MHz bands will no longer be certified under the
   provisions of § 15.247. The technical requirements for obtaining
   certification after this date for digitally modulated devices and the
   digitally modulated portion of hybrid devices are found in subpart E of
   this part. The provisions for the frequency hopping spread spectrum
   portion of hybrid devices will remain in § 15.247. Effective June 2,
   2016 systems using digital modulation techniques in the 5725-5850 MHz
   band certified under the provisions of § 15.247 may no longer be
   imported or marketed within the United States.

   [ 77 FR 4913 , Feb. 1, 2012, as amended at  78 FR 34927 , June 11, 2013;  79 FR 24578 , May 1, 2014]

   return arrow Back to Top


Goto Section: 15.35 | 15.38

Goto Year: 2013 | 2015
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public