§ 15.38   Incorporation by reference.

   (a) The materials listed in this section are incorporated by reference in
   this part. These incorporations by reference were approved by the Director
   of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part
   51.  These materials are incorporated as they exist on the date of the
   approval, and notice of any change in these materials will be published in
   the  Federal Register. The materials are available for purchase at the
   corresponding addresses as noted, and all are available for inspection at
   the  Federal  Communications  Commission,  445 12th St. SW., Reference
   Information Center, Room CY-A257, Washington, DC 20554, (202) 418-0270, and
   at the National Archives and Records Administration (NARA). For information
   on the availability of this material at NARA, call (202) 741-6030, or go to:
   http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_loc
   ations.html.

   (b)  The following documents are available from the following address:
   American National Standards Institute (ANSI), 25 West 43rd Street, 4th
   Floor,    New    York,    NY    10036,    (212)    642-4900,   or   at
   http://webstore.ansi.org/ansidocstore/default.asp;

   (1) ANSI C63.17-2013: “American National Standard for Methods of Measurement
   of the Electromagnetic and Operational Compatibility of Unlicensed Personal
   Communications Services (UPCS) Devices,” approved August 12, 2013, IBR
   approved for § 15.31.

   (2)  Third  Edition  of  the  International Special Committee on Radio
   Interference  (CISPR), Pub. 22, Information Technology Equipment-Radio
   Disturbance Characteristics-Limits and Methods of Measurement,” 1997, IBR
   approved for § 15.09.

   (c) The following documents are available from the following address: Cable
   Television Laboratories, Inc., 858 Coal Creek Circle, Louisville, Colorado,
   80027, http://www.cablelabs.com/opencable/udcp, (303) 661-9100;

   (1)  M-UDCP-PICS-I04-080225, “Uni-Directional Cable Product Supporting
   M-Card: Multiple Profiles; Conformance Checklist: PICS,” February 25, 2008,
   IBR approved for § 15.123(c).

   (2) TP-ATP-M-UDCP-I05-20080304, “Uni-Directional Digital Cable Products
   Supporting M-Card; M-UDCP Device Acceptance Test Plan,” March 4, 2008, IBR
   approved for § 15.123(c).

   (d)  The following documents are available from the following address:
   Consumer Electronics Association, 1919 S. Eads St., Arlington; VA 22202,
   http://www.ce.org/Standards/Standard-Listings.aspx, (703) 907-7634.

   (1)  CEA-542-B: “CEA Standard: Cable Television Channel Identification
   Plan,” July 2003, IBR approved for § 15.118.

   (2) CEA-766-A: “U.S. and Canadian Region Rating Tables (RRT) and Content
   Advisory Descriptors for Transport of Content Advisory Information using
   ATSC A/65-A Program and System Information Protocol (PSIP),” April 2001, IBR
   approved for § 15.120.

   (3) Uni-Dir-PICS-I01-030903: “Uni-Directional Receiving Device: Conformance
   Checklist: PICS Proforma,” September 3, 2003, IBR approved for § 15.123(c).

   (4) Uni-Dir-ATP-I02-040225: “Uni-Directional Receiving Device, Acceptance
   Test Plan,” February 25, 2004, IBR approved for § 15.123(c).

   (e) The following documents are available from the following address: Global
   Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, (800)
   854-7179, or at http://global.ihs.com;

   (1) EIA-608: “Recommended Practice for Line 21 Data Service,” 1994, IBR
   approved for § 15.120.

   (2) EIA-744: “Transport of Content Advisory Information Using Extended Data
   Service (XDS),” 1997, IBR approved for § 15.120.

   (f) Institute of Electrical and Electronic Engineers (IEEE), 3916 Ranchero
   Drive, Ann Arbor, MI 48108, 1-800-699-9277, http://www.techstreet.com/ieee.

   (1) ANSI C63.4-2014: “American National Standard for Methods of Measurement
   of  Radio-Noise  Emissions  from Low-Voltage Electrical and Electronic
   Equipment in the Range of 9 kHz to 40 GHz,” ANSI approved June 13, 2014, IBR
   approved for § 15.31(a)(4), except clauses 4.5.3, 4.6, 6.2.13, 8.2.2, 9, and
   13.

   (2)  ANSI  C63.10-2013,  “American National Standard of Procedures for
   Compliance Testing of Unlicensed Wireless Devices,”ANSI approved June 27,
   2013, IBR approved for § 15.31(a)(3).

   (g) The following documents are available from the following addresses:
   Society of Cable Telecommunications Engineers (SCTE) c/o Global Engineering
   Documents, 15 Inverness Way East, Englewood, Colorado 80112 or the American
   National Standards Institute, 25 West 43rd Street, Fourth Floor, New York,
   NY 10036 or at http://www.scte.org/standards/index.cfm;

   (1) SCTE 28 2003 (formerly DVS 295): “Host-POD Interface Standard,” 2003,
   IBR approved for § 15.123.

   (2)  SCTE 40 2003 (formerly DVS 313): “Digital Cable Network Interface
   Standard,” 2003, IBR approved for § 15.123.

   (3) SCTE 41 2003 (formerly DVS 301): “POD Copy Protection System,” 2003, IBR
   approved for § 15.123.

   (4) ANSI/SCTE 54 2003 (formerly DVS 241): “Digital Video Service Multiplex
   and Transport System Standard for Cable Television,” 2003, IBR approved for
   § 15.123.

   (5) ANSI/SCTE 65 2002 (formerly DVS 234): “Service Information Delivered
   Out-of-Band for Digital Cable Television,” 2002, IBR approved for § 15.123.

   [ 77 FR 43013 , July 23, 2012, as amended at  80 FR 2838 , Jan. 21, 2015;  80 FR 33447 , June 12, 2015]

   return arrow Back to Top

Subpart B—Unintentional Radiators

   return arrow Back to Top