§ 2.910   Incorporation by reference.

   (a) The materials listed in this section are incorporated by reference in
   this part. These incorporations by reference were approved by the Director
   of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part
   51.  These materials are incorporated as they exist on the date of the
   approval, and notice of any change in these materials will be published in
   the Federal Register. All approved material is available for inspection at
   the  Federal  Communications  Commission,  445 12th St. SW., Reference
   Information Center, Room CY-A257, Washington, DC 20554, (202) 418-0270 and
   is available from the sources below. It is also available for inspection at
   the National Archives and Records Administration (NARA). For information on
   the availability of this material at NARA, call (202) 741-6030, or go to:
   http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_loc
   ations.html.

   (b) International Electrotechnical Commission (IEC), IEC Central Office, 3,
   rue  de Varembe, CH-1211 Geneva 20, Switzerland, Email: inmail@iec.ch,
   www.iec.ch.

   (1) CISPR 16-1-4:2010-04: “Specification for radio disturbance and immunity
   measuring apparatus and methods—Part 1-4: Radio disturbance and immunity
   measuring  apparatus—Antennas  and test sites for radiated disturbance
   measurements”,  Edition  3.0, 2010-04, IBR approved for § § 2.948(d) and
   2.950(f).

   (2) [Reserved]

   (c) Institute of Electrical and Electronic Engineers (IEEE), 3916 Ranchero
   Drive, Ann Arbor, MI 48108, 1-800-699-9277, http://www.techstreet.com/ieee;
   (ISO publications can also be purchased from the American National Standards
   Institute (ANSI) through its NSSN operation (www.nssn.org), at Customer
   Service, American National Standards Institute, 25 West 43rd Street, New
   York, NY 10036, telephone (212) 642-4900.)

   (1) ANSI C63.4-2014: “American National Standard for Methods of Measurement
   of  Radio-Noise  Emissions  from Low-Voltage Electrical and Electronic
   Equipment in the Range of 9 kHz to 40 GHz,” ANSI approved June 13, 2014, IBR
   approved for § 2.950(h) and:

   (i) Sections 5.4.4 through 5.5, IBR approved for § § 2.948(d) and 2.950(f);
   and

   (ii) [Reserved]

   (2)  ANSI  C63.10-2013,  “American National Standard of Procedures for
   Compliance Testing of Unlicensed Wireless Devices,” ANSI approved June 27,
   2013, IBR approved for § 2.950(g).

   (d) International Organization for Standardization (ISO), 1, ch. De la
   Voie-Creuse, CP 56, CH-1211, Geneva 20, Switzerland; www.iso.org ; Tel.: +
   41  22 749 01 11; Fax: + 41 22 733 34 30; email: central@iso.org. (ISO
   publications can also be purchased from the American National Standards
   Institute (ANSI) through its NSSN operation (www.nssn.org), at Customer
   Service, American National Standards Institute, 25 West 43rd Street, New
   York, NY 10036, telephone (212) 642-4900.)

   (1) ISO/IEC 17011:2004(E), “Conformity assessment—General requirements for
   accreditation  bodies accrediting conformity assessment bodies,” First
   Edition, 2004-09-01, IBR approved for § § 2.948(e), 2.949(b), 2.950(c) and
   (d), and 2.960(c).

   (2) ISO/IEC 17025:2005(E), “General requirements for the competence of
   testing and calibration laboratories,” Section Edition, 2005-05-15, IBR
   approved for § § 2.948(e), 2.949(b), 2.962(c) and (d).

   (3) ISO/IEC 17065:2012(E), “Conformity assessment—Requirements for bodies
   certifying products, processes and services,” First Edition, 2012-09-15, IBR
   approved for § § 2.950(b), 2.960(b), 2.962(b), (c), (d), (f), and (g).

   (4)  ISO/IEC  Guide  58:1993(E),  “Calibration  and testing laboratory
   accreditation systems—General requirements for operation and recognition”,
   First Edition 1993, IBR approved for § 2.950(d).

   (5) ISO/IEC Guide 61:1996(E), “General requirements for assessment and
   accreditation of certification/registration bodies”, First Edition 1996, IBR
   approved for § 2.950(c).

   (6) ISO/IEC Guide 65:1996(E), “General requirements for bodies operating
   product  certification  systems,” First Edition 1996, IBR approved for
   § 2.950(b).

   [ 80 FR 33439 , June 12, 2015]

   return arrow Back to Top

Application Procedures for Equipment Authorizations

   return arrow Back to Top