§ 2.950   Transition periods.

   (a) As of July 13, 2015 the Commission will no longer accept applications
   for Commission issued grants of equipment certification.

   (b) Prior to September 15, 2015 a TCB shall be accredited to either ISO/IEC
   Guide 65 or ISO/IEC 17065 (incorporated by reference, see § 2.910). On or
   after September 15, 2015 a TCB shall be accredited to ISO/IEC 17065.

   (c) Prior to September 15, 2015 an organization accrediting the prospective
   telecommunication  certification  body shall be capable of meeting the
   requirements  and  conditions  of  ISO/IEC  Guide  61 or ISO/IEC 17011
   (incorporated by reference, see § 2.910). On or after September 15, 2015 an
   organization accrediting the prospective telecommunication certification
   body shall be capable of meeting the requirements and conditions of ISO/IEC
   17011.

   (d) Prior to September 15, 2015 an organization accrediting the prospective
   accredited testing laboratory shall be capable of meeting the requirements
   and conditions of ISO/IEC Guide 58 or ISO/IEC 17011. On or after September
   15, 2015 an organization accrediting the prospective accredited testing
   laboratory shall be capable of meeting the requirements and conditions of
   ISO/IEC 17011.

   (e) The Commission will no longer accept applications for § 2.948 test site
   listing as of July 13, 2015. Laboratories that are listed by the Commission
   under  the § 2.948 process will remain listed until the sooner of their
   expiration date or July 13, 2016 and may continue to submit test data in
   support of certification applications for October 13, 2016. Laboratories
   with an expiration date before July 13, 2016 may request the Commission to
   extend their expiration date to July 13, 2016.

   (f) Measurement facilities used to make radiated emission measurements from
   1  GHz  to 40 GHz shall comply with the site validation option of ANSI
   C63.4-2014,  (clause  5.5.1a)1)) which references CISPR 16-1-4:2010-04
   (incorporated by reference, see § 2.910) by July 13, 2018.

   (g)  Measurements for intentional radiators subject to part 15 of this
   chapter  are  to  be  made  using  the  procedures in ANSI C63.10-2013
   (incorporated by reference, see § 2.910) by July 13, 2016.

   (h)  Measurements for unintentional radiators are to be made using the
   procedures in ANSI C63.4, except clauses 4.5.3, 4.6, 6.2.13, 8.2.2, 9, and
   13 (incorporated by reference, see § 2.910), by July 13, 2016.

   [ 80 FR 33443 , June 12, 2015]

   return arrow Back to Top

Verification

   Authority: Sections 2.951 through 2.957 are issued under secs. 4, 303, 307,
   48 Stat., as amended, 1066, 1082, 1083; 47 U.S.C. 154, 303, 307.

   Source: Sections 2.951 through 2.957 appear at  46 FR 23249 , Apr. 24, 1981,
   unless otherwise noted.

   return arrow Back to Top