§ 95.1217   Labeling requirements.

   (a)(1) MedRadio programmer/control transmitters operating in the 401-406 MHz
   band shall be labeled as provided in part 2 of this chapter and shall bear
   the following statement in a conspicuous location on the device:

   “This  device  may  not  interfere  with  stations  operating  in  the
   400.150-406.000  MHz  band  in the Meteorological Aids, Meteorological
   Satellite, and Earth Exploration Satellite Services and must accept any
   interference received, including interference that may cause undesired
   operation.”

   The statement may be placed in the instruction manual for the transmitter
   where it is not feasible to place the statement on the device.

   (2) MedRadio programmer/control transmitters operating in the 413-419 MHz,
   426-432 MHz, 438-444 MHz, and 451-457 MHz bands shall be labeled as provided
   in  part 2 of this chapter and shall bear the following statement in a
   conspicuous location on the device:

   “This device may not interfere with stations authorized to operate on a
   primary basis in the 413-419 MHz, 426-432 MHz, 438-444 MHz, and 451-457 MHz
   bands, and must accept any interference received, including interference
   that may cause undesired operation.”

   The statement may be placed in the instruction manual for the transmitter
   where it is not feasible to place the statement on the device.

   (3) MedRadio programmer/control transmitters operating in the 2360-2400 MHz
   band shall be labeled as provided in part 2 of this chapter and shall bear
   the following statement in a conspicuous location on the device:

   “This device may not interfere with stations authorized to operate on a
   primary basis in the 2360-2400 MHz band, and must accept any interference
   received, including interference that may cause undesired operation.”

   The statement may be placed in the instruction manual for the transmitter
   where it is not feasible to place the statement on the device.

   (b) Where a MedRadio programmer/control transmitter is constructed in two or
   more  sections  connected by wire and marketed together, the statement
   specified in this section is required to be affixed only to the main control
   unit.

   (c) MedRadio transmitters shall be identified with a serial number, except
   that in the 2360-2400 MHz band only the MedRadio programmer/controller
   transmitter shall be identified with a serial number. The FCC ID number
   associated with a medical implant transmitter and the information required
   by § 2.925 of this chapter may be placed in the instruction manual for the
   transmitter and on the shipping container for the transmitter, in lieu of
   being placed directly on the transmitter.

   [ 74 FR 22709 , May 14, 2009, as amended at  77 FR 4270 , Jan. 27, 2012;  77 FR 55734 , Sept. 11, 2012]

   return arrow Back to Top