Goto Section: 2.946 | 2.948 | Table of Contents
Revised as of December 4, 2012
Goto Year:2011 |
§ 2.947 Measurement procedure.
(a) The Commission will accept data which have been measured in
accordance with the following standards or measurement procedures:
(1) Those set forth in bulletins or reports prepared by the
Commission's Office of Engineering and Technology. These will be issued
as required, and specified in the particular part of the rules where
(2) Those acceptable to the Commission and published by national
engineering societies such as the Electronic Industries Association,
the Institute of Electrical and Electronic Engineers, Inc., and the
American National Standards Institute.
(3) Any measurement procedure acceptable to the Commission may be used
to prepare data demonstrating compliance with the requirements of this
(b) Information submitted pursuant to paragraph (a) of this section
shall completely identify the specific standard or measurement
(c) In the case of equipment requiring measurement procedures not
specified in the references set forth in paragraphs (a) (1) and (2) of
this section, the applicant shall submit a detailed description of the
measurement procedures actually used.
(d) A listing of the test equipment used shall be submitted.
(e) If deemed necessary, the Commission may require additional
information concerning the measurement procedures employed in obtaining
the data submitted for equipment authorization purposes.
[ 42 FR 44987 , Sept. 8, 1977, as amended at 44 FR 39181 , July 5, 1979;
51 FR 12616 , Apr. 14, 1986]
return arrow Back to Top
Goto Section: 2.946 | 2.948
Goto Year: 2011 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public