FCC 76.1909 Revised as of December 4, 2012
Goto Year:2011 |
2013
§ 76.1909 Redistribution control of unencrypted digital terrestrial
broadcast content.
(a) For the purposes of this section, the terms unencrypted digital
terrestrial broadcast content, EIT, PMT, broadcast flag, covered
demodulator product, and marked content shall have the same meaning as
set forth in § 73.9000 of this chapter.
(b) Encrypted retransmission. Where a multichannel video programming
distributor retransmits unencrypted digital terrestrial broadcast
content in encrypted form, such distributor shall, upon demodulation of
the 8-VSB, 16-VSB, 64-QAM or 256-QAM signal, inspect either the EIT or
PMT for the broadcast flag, and if the broadcast flag is present:
(1) Securely and robustly convey that information to the consumer
product used to decrypt the distributor's signal information, and
(2) Require that such consumer product, following such decryption,
protect the content of such signal as if it were a covered demodulator
product receiving marked content.
(c) Unencrypted retransmission. Where a multichannel video programming
distributor retransmits unencrypted digital terrestrial broadcast
content in unencrypted form, such distributor shall, upon demodulation:
(1) Preserve the broadcast flag, if present, in both the EIT and PMT;
and
(2) Use 8-VSB, 16-VSB, 64-QAM, or 256-QAM signal modulation for the
retransmission.
(d) Unmarked content. Where a multichannel video programming
distributor retransmits unencrypted digital terrestrial broadcast
content that is not marked with the broadcast flag, the multichannel
video programming distributor shall not encode such content to restrict
its redistribution.
[ 68 FR 67607 , Dec. 3, 2003]
return arrow Back to Top
Subpart X—Access to MDUs
return arrow Back to Top
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.