§  80.329   Safety signals and messages.

   (a) The safety signal indicates that the station is about to transmit a
   message concerning the safety of navigation or giving important
   meteorological warnings.

   (b) In radiotelegraphy, the safety signal consists of three repetitions
   of the group TTT, sent with the individual letters of each group, and
   the successive groups clearly separated from each other. It must be
   sent before the call.

   (c) In radiotelephony, the safety signal consists of the word SECURITE,
   pronounced as in French, spoken three times and transmitted before the
   call.

   (d) The safety signal and call must be sent on one of the international
   distress frequencies (2182 kHz or 156.8 MHz radiotelephone). Stations
   which cannot transmit on a distress frequency may use any other
   available frequency on which attention might be attracted.

   (e) The safety signal and call must be followed by the safety message.
   Where practicable, the safety message should be sent on a working
   frequency, and a suitable announcement to this effect must be made at
   the end of the call.

   (f) Messages about meteorological warnings, of cyclones, dangerous ice,
   dangerous wrecks, or any other imminent danger to marine navigation
   must be preceded by the safety signal.

   (g) Stations hearing the safety signal must not make any transmission
   likely to interfere with the message.

   [ 51 FR 31213 , Sept. 2, 1986, as amended at  69 FR 64674 , Nov. 8, 2004;
    73 FR 4485 , Jan. 25, 2008]

   return arrow Back to Top