§  95.1217   Labeling requirements.

   (a)(1) MedRadio programmer/control transmitters operating in the
   401-406 MHz band shall be labeled as provided in part 2 of this chapter
   and shall bear the following statement in a conspicuous location on the
   device:

   "This device may not interfere with stations operating in the
   400.150-406.000 MHz band in the Meteorological Aids, Meteorological
   Satellite, and Earth Exploration Satellite Services and must accept any
   interference received, including interference that may cause undesired
   operation."

   The statement may be placed in the instruction manual for the
   transmitter where it is not feasible to place the statement on the
   device.

   (2) MedRadio programmer/control transmitters operating in the 413-419
   MHz, 426-432 MHz, 438-444 MHz, and 451-457 MHz bands shall be labeled
   as provided in part 2 of this chapter and shall bear the following
   statement in a conspicuous location on the device:

   "This device may not interfere with stations authorized to operate on a
   primary basis in the 413-419 MHz, 426-432 MHz, 438-444 MHz, and 451-457
   MHz bands, and must accept any interference received, including
   interference that may cause undesired operation."

   The statement may be placed in the instruction manual for the
   transmitter where it is not feasible to place the statement on the
   device.

   (3) MedRadio programmer/control transmitters operating in the 2360-2400
   MHz band shall be labeled as provided in part 2 of this chapter and
   shall bear the following statement in a conspicuous location on the
   device:

   "This device may not interfere with stations authorized to operate on a
   primary basis in the 2360-2400 MHz band, and must accept any
   interference received, including interference that may cause undesired
   operation."

   The statement may be placed in the instruction manual for the
   transmitter where it is not feasible to place the statement on the
   device.

   (b) Where a MedRadio programmer/control transmitter is constructed in
   two or more sections connected by wire and marketed together, the
   statement specified in this section is required to be affixed only to
   the main control unit.

   (c) MedRadio transmitters shall be identified with a serial number,
   except that in the 2360-2400 MHz band only the MedRadio
   programmer/controller transmitter shall be identified with a serial
   number. The FCC ID number associated with a medical implant transmitter
   and the information required by §  2.925 of this chapter may be placed
   in the instruction manual for the transmitter and on the shipping
   container for the transmitter, in lieu of being placed directly on the
   transmitter.

   [ 74 FR 22709 , May 14, 2009, as amended at  77 FR 4270 , Jan. 27, 2012;  77 FR 55734 , Sept. 11, 2012]

   Effective Date Note: At  77 FR 55734 , Sept. 11, 2012, paragraph (a)(3)
   in §  95.1217 was added. This paragraph contains information collection
   and recordkeeping requirements and will not become effective until
   approval has been given by the Office of Management and Budget.

   return arrow Back to Top